Metal stamping kits are now available in Australia

Metal stampings kits are getting a second look in Australia, thanks to metal stamping experts at

Australia’s metal stampers have taken the time to learn about the technology behind metal stampings and have developed some of the most innovative and high-quality stamping systems available.

Metal stamping technology was developed in the 1990s by Australian metal stamp expert Mark McLean, who is now the managing director of, a leading online supplier of stamping solutions.

McLean said that metal stamp is “a really important technology for us in Australia” due to its ability to withstand extreme conditions.

“We know that the weather in Australia is really bad and when we were in Perth a couple of weeks ago, we had to leave and drive down to Melbourne, we got the weather and the weather was really bad, it was like, we’re going to die in this storm,” he said.

The metal stamp technology uses a metal coating called metal oxide to seal a piece of metal into a solid, rigid and stable position.

Mold, moisture and temperature can all be reduced, making the metal alloy very hard and rigid.

Metal stamp is an all-weather stamping method, with the metal coating not only sealing the metal piece but also allowing the metal to be used as a permanent marker.

To produce the metal stamp, the metal sheet is ground to powder and then placed into a mold, which is then placed in a freezer.

The metal stamp can then be applied directly onto the metal surface of the piece of the metal and the stamping is done.

After the stamp is applied, it is dried for a period of 24 hours.

Then, the stamp can be polished, sealed with a resin and the final product is a stamp that is ready to be stamped.

While McLean is no longer working in Australia and the technology was introduced back in the early 2000s, the technology is not entirely new.

Before metal stamp was invented, stamping was done with an abrasive like sandpaper.

In a previous article, we covered how to stamp metal using a metal hammer, hammer heads, and a metal stamp.

Now, metal stamp comes with a new set of features.

Metal stampers can now use a metal cutting wheel to cut out metal parts of metal objects and use that as a template for making stamping machines.

Instead of using sandpaper, stampers now use metal cutting wheels to cut pieces of metal out of a piece.

As the technology advances, stampings will continue to evolve, and it is possible that metal stamps could become even more important as they become more popular.

What’s your favorite metal stamp technique?

Share your thoughts below.